IN SHORT
- Same bike, same odd outline, two builds two years apart.
- The layout is 26S8P: 208 cells in two stacked modules.
- The pictures show what changed between the builds, and the new pack at the end.
A CHAT WE SEE A LOT
R
Rider
eh i came back again for battery
same same as last time can already right
same same but different leh
wah lau which part different sia
2024 one use fibre-mesh tape outside
2026 one use fr-4 sheet, copper plates cut to each group
so shape still same ah
same bike same space, outline same
come down see lah
we show u old one and new one side by side
26S8P in this funny shape
Wah this battery space ah, wide and flat with angled corners, look easy until you try to put a rectangle in there. Then everybody stuck.
The layout runs 26 series groups through two modules, 13 groups per module, with eight cells per group: 208 cells. Both builds start from that same layout.
26S8P · 208 / 208 CELLS PLACED · PACK VALID · 304 × 197 MM FOOTPRINT
June 2024: first one
Wah, back in June 2024 we built the first one for this bike, already quite some time ago. Cells went into the holder, then the series groups were joined across each module.
Two modules kept the same outline, with fibre-mesh tape around the outside before the case. That’s the 2024 build, no extra story needed.
2026: same space, new build
Steady lah, same battery space in 2026, so the outline stays put. The copper is now plates cut to each series group.
Outside, this build uses FR-4 sheet instead of mesh tape. That’s the change you can see in the materials.
What changed? This bit.
- Busbars: copper plates cut to each series group in 2026.
- Outer wrap: fibre-mesh tape in 2024, FR-4 sheet in 2026.
- Outline: unchanged. Same bike, same space.
THE FINISHED PACK
2026 pack, all done
Siap lah, same shape as the one we built two years ago, with the 2026 copper plates and FR-4 sheet. Back in its case for the same Fiido.
Got an older pack from us?
Send a photo of the label and tell us how it’s riding.
