48v 25ah Silverfish casing for MOBOT ORCA / Leader / Ultra eBikes
-full charge voltage 54.6v cutoff voltage 39.0v (+-0.5v is normal)
– 13s 5p Samsung INR21700-50G cells
– Original connector port (C13/C14)
– XLR 3 pin charging port
– 20A constant discharge. UP TO 40a peak discharge
This bundle is inclusive of the following items:
– Battery Pack
– Extended 45cm Casing
– 3 months warranty for manufacturer defects (eligible for 1-1 exchange and free repair only)
– Extended Replacement Railing to secure battery to the bike.
Remarks:
– Slots inside Mobot ORCA / Leader / Ultra eBike Battery compartment
– No need to change or modify seat post to fit the battery
– Can change to other connectors or remove casing, subject to availability (must be requested on checkout page)
– Motor does not need to be modified to use this battery.
– Works with stock MOBOT ORCA / Leader / Ultra Controller. Top Speed will not improve, but range improves a lot.
– Battery can be used on any 48v controller below 25a without any problems i.e 18a and 22a
– Will yield a top speed of 30-40km/h with controllers between 18a-22a.
Yusry (verified owner) –
Truly recommended! 👍
Kay was very helpful and patient in answering my numerous queries. The after-sales chat was also great!
Bought the battery for my Mobot Orca 2.0 and the cut-off issues is gone! Feels good to know that I can ride without worrying about battery life!
Definitely will come back here if I want to get another battery again!